Most of us are familiar with Roomba, the extremely popular robotic vacuum that scours your floors and carpet, sucking up all type of debris, even when you’re not at home. But as great as it is to have a clean floor, there are plenty of other places that can be breeding grounds for germs, from our smartphone displays and toilet bowls to bed sheets and chopping boards.
That’s where a similarly puck-shaped new cleaning robot enters the fray. Called UV Cleanizer Zoom, it’s an automated smart cleaning and disinfecting robot that emits UV-C light to kill a claimed 99.9 percent of germs without needing any nasty chemicals to do so. It’s small enough to fit in the palm of your hand, making it a great travel accessory, and it can be used in handheld mode or it can travel around autonomously using multiple sensors.
When Tom Yang and Cecilia Hsu from Ventur Studio were vacationing they found a dirty hotel room with unsanitary conditions and ideas began forming around a hotel cleaning device. Later they found information from the University of Houston that television remotes and light switches are the most contaminated areas of hotel rooms. They cite an average of 112.7 colony-forming units of bacteria per cubic centimeter, with a recommended ceiling for hospitals 5 colony-forming bacteria per cubic centimeter. The team worked on a solution to remove germs from their everyday living spaces but especially their travel spaces. A crowdfunding campaign is currently running for UV Cleanizer Zoom, the bacteria killing robot.
What is UV Cleanizer Zoom Bacteria Killing Machine?
The robots are fast and efficient, able to eliminate far more bacteria than humanly possible. Their ability to move around enables them to attack shadowed areas where many harmful organisms tend to manifest in places that are often missed by sanitization teams.
Infection Prevention Technologies (iPT), an industry leader in microbial desensitizing devices, claims to have built the most powerful UV light disinfection system in the world.
The UV Cleanizer Zoom is the most powerful in the lineup, and it is already making an impact on many hospitals around the world.
CleanseBot is the world’s ONLY smart travel robot designed with YOU in mind. CleanseBot is a smart robot with artificial intelligence and 18 sensors built in. It uses FOUR UV-C lamps to blast away 99.99% of germs and bacteria on ANY SURFACE.
But most importantly, on your hotel bed. Hotels are notorious for germs and bacteria and you don’t want to worry about that when you’re traveling – whether you are traveling for work or for fun! Just set the CleanseBot down on the bed, turn it on for either 30 or 60 minutes, and go about your day while it sanitizes and disinfects your bed sheets and blankets!
Not only does CleanseBot kill germs, bacteria, and dust mites, but UV-C light has been proven in many studies to actually help prevent the spread of airborne viruses, too. CleanseBot is the ONLY thing like this in the world!
The UV Bacteria-Killing Robot in Action
In practice, hospital staff reported minor improvements in hospital room turnover times, the time in which it takes a room to be prepared for the next patient. However, the robot could perform the task by itself with minimal staff intervention.
A single operator is required to guide and monitor the robot as it sterilizes a room. Despite the inability to reach behind areas, the UV light penetrates some distance around the robot, sterilizing everything in its proximity.
It can also clean entire rooms better than humans, helping to eradicate HAI instances. Inside, the robot is guided around a room where it determines the level of UV rays to use in order to maximize sterilization.
The robot can carefully navigate around the room while using germicidal UV-C rays to disinfect equipment.
How Does UV Cleanizer Zoom Work?
Step 1:
For Under Blanket Mode, pull the top and bottom halves of the UV Cleanizer Zoom apart to reveal the wheels.
Set the UV Cleanizer Zoom Wheels down on any surface, including a bed underneath the blankets, and press the power button to turn on.
It will clean on it’s own for 30 or 60 minutes. Press the power button once for 30 minutes and twice for a 60 minutes run time.
Step 2:
In Handheld mode, simply put your hand under the strap and hold the power button for 3 seconds to turn it on.
Press the power button again to turn on the downward-facing UV-C Lights.
Step 3:
For Power Bank Mode, Use the USB-C Port to Power any Device.
Step 4:
For easy Storage, put the handle cover back on the wheeled part of the CleanseBot, Hold the power button for 3 seconds to turn off, and store.
It’s portable size means it can be kept easily in drawers, backpacks, and more.
Last Updated on
